3Com S7902E Command Reference Manual - page 1549
1-17
ASBR LSP 0 0 0 0
BGP IPV6 LSP 0 0 0 0
---------------------------------------------------------------
LSP 1 1 0 0
CRLSP 2 2 0 0
Table 1-8 display mpls lsp statistics
command output description
Field
Description
Ingress
Number of LSPs taking the current LSR as ingress
Transit
Number of LSPs taking the current LSR as transit LSR
Egress
Number of LSPs taking the current LSR as egress
Currently, the S7900E series switches do not support static CR-LSPs, CR-LDP generated CR-LSPs, or
RSVP generated CR-LSPs.
display mpls nhlfe
Syntax
display mpls nhlfe
[
token
] [
slot
slot-number
] [
include
text
]
View
Any view
Default Level
1: Monitor level
Parameters
token
: NHLFE entry index. The value range varies by device.
include text
: Specifies NHLFE entries including a specified string.
slot slot-number
: Specifies the NHLFE entries of the board in a slot.
Description
Use the
display
mpls nhlfe
command to display information about NHLFE entries.
With the
token
argument not specified, the command displays information about all NHLFE entries.
Examples
# Display information about a specified NHLFE entry.
Out-Interface Token Oper Nexthop Deep Stack
----------------------------------------------------------------------
Vlan2 2 PUSH 88.1.1.2 1 1024