3Com S7902E Command Reference Manual - page 2187
1-14
Parameters
freq-sec
: Frequency with which the system saves the log file, in the range 1 to 86,400 seconds. The
default value is 86,400.
Description
Use the
info-center logfile frequency
command to configure the frequency with which the system
saves the log file.
Use the
undo info-center logfile frequency
command to restore the default frequency.
Examples
# Configure the frequency with which the system saves the log file as 60,000 seconds.
[Sysname] info-center logfile frequency 60000
info-center logfile size-quota
Syntax
info-center logfile size-quota
size
undo
info-center logfile size-quota
View
System view
Default Level
2: System level
Parameters
size:
The maximum capacity of a disk, in MB. The value, however, cannot be smaller than 1 MB and
larger than 10 MB. The default value is 1.
Description
Use the
info-center logfile size-quota
command to set the maximum storage space reserved for a log
file.
Use the
undo
info-center logfile size-quota
command to restore the default maximum storage space
reserved for a log file.
Examples
# Set the maximum storage space reserved for a log file to 6 MB.
[Sysname] info-center logfile size-quota 6
info-center logfile switch-directory
Syntax
info-center logfile switch-directory
dir-name