3Com S7902E Command Reference Manual - page 911
1-47
View
BGP view/BGP-VPN instance view
Default Level
2: System level
Parameters
group-name
: Name of a peer group, a string of 1 to 47 characters.
ip-address
: IP address of a peer.
description-text
: Description information for the peer/peer group, a string of 1 to 79 characters.
Description
Use the
peer description
command to configure the description information for a peer/peer group.
Use the
undo peer description
command to remove the description information of a peer/peer group.
By default, no description information is configured for a peer/peer group.
Create a peer/peer group before configuring a description for it.
Related commands:
display bgp peer
.
Examples
# In BGP view, configure the description information of the peer group test as ISP1.
[Sysname] bgp 100
[Sysname-bgp] peer test description ISP1
# In BGP-VPN instance view, configure the description information of the peer group test as ISP1(the
VPN has been created).
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] peer test description ISP1
peer ebgp-max-hop (BGP/BGP-VPN instance view)
Syntax
peer
{
group-name | ip-address
}
ebgp-max-hop
[
hop-count
]
undo peer
{
group-name | ip-address
}
ebgp-max-hop
View
BGP view/BGP-VPN instance view
Default Level
2: System level
Parameters
group-name
: Name of a peer group, a string of 1 to 47 characters.