3Com S7902E Command Reference Manual - page 1847
1-1
1
Portal Configuration Commands
EA series cards, LSQ1GP12EA and LSQ1TGX1EA for example, do not support Portal authentication.
Portal Configuration Commands
display portal acl
Syntax
display portal acl
{
all
|
dynamic
|
static
}
interface
interface-type interface-number
View
Any view
Default Level
1: Monitor level
Parameters
all
: Displays all portal access control lists (ACLs), including dynamic ones and static ones.
dynamic
: Displays dynamic portal ACLs, namely, ACLs generated after a user passes portal
authentication.
static
: Displays static portal ACLs, namely, ACLs generated by related configurations.
interface interface-type interface-number
: Displays the ACLs on the specified interface.
Description
Use the
display portal acl
command to display the ACLs on a specified interface.
Examples
# Display all ACLs on interface Vlan-interface 2.
Vlan-interface2 portal ACL rule:
Rule 0
Inbound interface = Vlan-interface2
Type = static
Action = permit
Source: