3Com S7902E Command Reference Manual - page 1404
1-33
Examples
# Disable join suppression on VLAN-interface 100.
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim ipv6 hello-option neighbor-tracking
pim ipv6 hello-option override-interval
Syntax
pim ipv6 hello-option override-interval
interval
undo pim ipv6 hello-option override-interval
View
Interface view
Default Level
2: System level
Parameters
interval
: Prune override interval in milliseconds, with an effective range of 1 to 65,535.
Description
Use the
pim ipv6 hello-option override-interval
command to configure the prune override interval on
the current interface.
Use the
undo pim ipv6 hello-option override-interval
command to restore the system default.
By default, the prune override interval is 2,500 milliseconds.
Related commands:
pim ipv6 hello-option lan-delay
,
hello-option lan-delay
,
hello-option
override-interval
.
Examples
# Set the prune override interval to 2,000 milliseconds on VLAN-interface 100.
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim ipv6 hello-option override-interval 2000
pim ipv6 holdtime assert
Syntax
pim ipv6 holdtime assert
interval
undo pim ipv6 holdtime assert
View
Interface view