3Com S7902E Command Reference Manual - page 1577
1-45
Related commands:
display mpls statistics interface
.
Examples
# Clear MPLS statistics for interface VLAN-interface 1.
reset mpls statistics lsp
Syntax
reset mpls statistics
lsp
{
index
|
all
|
name
lsp-name
}
View
User view
Default Level
2: System level
Parameters
index
: Index number of the LSP, in the range 0 to 4294967295.
all
: Specifies all LSPs.
lsp-name
: Name of the LSP, a string of 1 to 15 characters.
Description
Use the
reset mpls statistics lsp
command to clear MPLS statistics for all LSPs or the LSP with a
specified index or name.
Related commands:
display mpls statistics lsp
.
Examples
# Clear MPLS statistics for LSP
lsp1
.
static-lsp egress
Syntax
static-lsp egress lsp-name
incoming-interface
interface-type interface-number
in-label
in-label
undo static-lsp
egress
lsp-name
View
System view
Default Level
2: System level
Parameters
lsp-name
: Name for the LSP, a string of 1 to 15 characters.
interface-type interface-number
: Specifies an interface by its type and number.