3Com S7902E Command Reference Manual - page 1542
1-10
regular-expression
: Regular expression, a case-sensitive string of 1 to 80 characters.
Description
Use the
display mpls ldp remote-peer
command to display information about remote LDP peers.
Related commands:
mpls ldp
(system view),
mpls ldp
(interface view),
remote-ip
.
Examples
# Display information about remote peer BJI.
LDP
Remote
Entity
Information
--------------------------------------------------------------------------
Remote Peer Name : BJI
Remote Peer IP : 3.3.3.3 LDP ID : 1.1.1.1:0
Transport Address : 1.1.1.1
Configured Keepalive Timer : 45 Sec
Configured Hello Timer : 45 Sec
Negotiated Hello Timer : 45 Sec
Hello Message Sent/Rcvd : 3/2 (Message Count)
--------------------------------------------------------------------------
display mpls ldp session
Syntax
display mpls ldp session
[
all
[
verbose
] | [
vpn-instance
vpn-instance-name
] [
peer-id
|
verbose
] ]
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Default Level
1: Monitor level
Parameters
all
: Displays all information.
verbose
: Displays detailed information.
vpn-instance-name
: Name of the VPN instance, a case-sensitive string of 1 to 31 characters. Specify
this argument to display information about all LDP sessions of a specified VPN.
peer-id
: LSR ID of the peer.
|
: Uses a regular expression to filter the output information. For details about regular expression, refer to
Basic System Configuration
in the
System
Volume
.
begin
: Displays all lines starting with the line that matches the regular expression.
exclude
: Displays all lines other than those matching the regular expression..
include
: Displays all lines matching the regular expression.