3Com S7902E Command Reference Manual - page 1182
1-25
1: Vlan-interface2
Protocol: pim-sm, UpTime: 02:54:43, Expires: 00:02:47
Table 1-9 display pim routing-table
command output description
Field
Description
VPN-Instance: public net
Public instance
Total 0 (*, G) entry; 1 (S, G) entry
Number of (S,G) and (*, G) entries in the PIM routing table
(172.168.0.2, 227.0.0.1)
An (S, G) entry in the PIM routing table
Protocol
PIM mode, PIM-SM or PIM-DM
Flag
Flag of the (S, G) or (*, G) entry in the PIM routing table
Uptime
Length of time for which the (S, G) or (*, G) entry has been
existing
Upstream interface
Upstream (incoming) interface of the (S, G) or (*, G) entry
Upstream neighbor
Upstream neighbor of the (S, G) or (*, G) entry
RPF prime neighbor
RPF neighbor of the (S, G) or (*, G) entry
z
For a (*, G) entry, if this router is the RP, the RPF
neighbor of this (*, G) entry is NULL.
z
For a (S, G) entry, if this router directly connects to the
multicast source, the RPF neighbor of this (S, G) entry
is NULL.
Downstream interface(s) information
Information of the downstream interface(s), including:
z
Number of downstream interfaces
z
Downstream interface name
z
Protocol type on the downstream interface(s)
z
Uptime of the downstream interface(s)
z
Expiry time of the downstream interface(s)
display pim rp-info
Syntax
display pim
[
all-instance
|
vpn-instance vpn-instance-name
]
rp-info
[
group-address
]
View
Any view
Default Level
1: Monitor level
Parameters
all-instance
: Specifies all instances.
vpn-instance vpn-instance-name
: Specifies a VPN instance. A VPN instance name is a case sensitive
string of up to 31 characters and must not contain any space.
group-address
: Address of the multicast group of which the RP information is to be displayed, in the
range of 224.0.1.0 to 239.255.255.255. If you do not provide a group address, this command will display
the RP information corresponding to all multicast groups.