3Com S7902E Command Reference Manual - page 2227
1-24
Field
Description
Current
Configuration
Configurations of the PoE configuration file that currently take effect on a PoE
interface
Because not all the configurations of a PoE configuration file can be applied successfully, only the
configurations that currently take effect on the interface are displayed.
poe enable
Syntax
poe enable
undo poe enable
View
PoE interface view, PoE-profile file view
Default Level
2: System level
Parameters
None
Description
Use the
poe enable
command to enable PoE on a PoE interface.
Use the
undo poe enable
command to disable PoE on a PoE interface.
By default, PoE is disabled on a PoE interface.
z
If a PoE configuration file is already applied to a PoE interface, you need to remove the
application of the file to the PoE interface before configuring the interface in PoE-profile view.
z
If a PoE configuration file is applied to a PoE interface, you need to remove the application of the
file to the PoE interface before configuring the interface in PoE interface view.
Examples
# Enable PoE on a PoE interface.
[Sysname] interface ethernet 2/0/1