3Com S7902E Command Reference Manual - page 249
1-8
Default Level
1: Monitor level
Parameters
None
Description
Use the
display gvrp status
command to display the global enable/disable state of GVRP.
Examples
# Display the global GVRP enable/disable state.
GVRP is enabled
display gvrp vlan-operation interface
Syntax
display gvrp vlan-operation
interface
interface-type interface-number
View
Any view
Default Level
0: Visit level
Parameters
interface
interface-type interface-number
: Displays the information about dynamic VLAN operations on
the port specified by its type and number.
Description
Use the
display gvrp vlan-operation interface
command to display the information about dynamic
VLAN operations performed on a port.
Examples
# Display the information about dynamic VLAN operations performed on GigabitEthernet 2/0/1.
Dynamic VLAN operations on port GigabitEthernet2/0/1
Operations of creating VLAN : 2-100
Operations of deleting VLAN : none
Operations of adding VLAN to TRUNK : 2-100
Operations of deleting VLAN from TRUNK : none
gvrp
Syntax
gvrp