- DL manuals
- 3Com
- Switch
- S7902E
- Command Reference Manual
3Com S7902E Command Reference Manual - page 232
3-4
[Sysname-vlan4] quit
[Sysname] isolate-user-vlan 2 secondary 3 to 4
isolate-user-vlan enable
Syntax
isolate-user-vlan enable
undo isolate-user-vlan enable
View
VLAN view
Default Level
2: System level
Parameters
None
Description
Use the
isolate-user-vlan enable
command to configure the current VLAN as an isolate-user-VLAN.
Use the
isolate-user-vlan enable
command to remove the isolate-user-VLAN configuration for the
current VLAN.
By default, no VLAN is an isolate-user-VLAN.
An isolate-user-VLAN may include multiple ports, including the one connected to the upstream device.
Related commands:
display isolate-user-vlan
.
Examples
# Configure VLAN 5 as an isolate-user-VLAN.
[Sysname] vlan 5
[Sysname-vlan5] isolate-user-vlan enable