3Com S7902E Command Reference Manual - Olt Configuration Commands
1-1
1
OLT Configuration Commands
This document discusses the commands specific to Ethernet Passive Optical Network (EPON).
For the commands of switch features on optical line terminal (OLT) and optical network unit (ONU)
ports, refer to
4 Switch Feature-Related Configuration Commands
.
The actual output information varies with devices.
OLT Configuration Commands
dba-algorithm enable
Syntax
dba-algorithm
enable
{
extdba
|
intdba
}
undo dba-algorithm update
View
OLT port view
Default Level
2: System level
Parameters
extdba
: Enables the external DBA algorithm for implementation through an external DBA algorithm file.
intdba
: Enables the internal DBA algorithm for implementation within the device.
Description
Use the
dba-algorithm enable
command to enable the internal or external DBA algorithm.
Use the
undo dba-algorithm update
command to remove the loaded external DBA algorithm file and
restore the internal DBA algorithm.
By default, the internal DBA algorithm is enabled.
To use the
dba-algorithm enable
command to enable the external DBA algorithm, use the
dba-algorithm update
command to load the specified DBA algorithm file first.