3Com S7902E Command Reference Manual - page 2178
1-5
Severity
Value
Description
critical 2
Critical
information
errors 3
Error
information
warnings 4
Warnings
notifications
5
Normal errors with important information
informational
6
Informational information to be recorded
debugging 7
Debugging
information
size buffersize
: Displays specified number of the latest log messages in the log buffer, where
buffersize
represents the number of the latest log messages to be displayed in the log buffer, in the range 1 to
1,024.
slot slotnum
: Slot number.
|
:
Uses a regular expression to filter the output information. For detailed information about regular
expression, refer to section CLI Display in
Basic System Configuration
in the
System Volume
.
z
begin
: Displays the line that matches the regular expression and all the subsequent lines.
z
exclude
: Displays the lines that do not match the regular expression.
z
include
: Displays the lines that match the regular expression.
regular-expression
: Regular expression, a string of 1 to 256 characters. Note that this argument is
case-sensitive and can have spaces included.
Description
Use the
display logbuffer
command to display the state of the log buffer and the log information
recorded. Absence of the
size
buffersize
argument indicates that all log information recorded in the log
buffer is displayed.
Examples
# Display the state of the log buffer and the log information recorded.
Logging buffer configuration and contents:enabled
Allowed max buffer size : 1024
Actual buffer size : 512
Channel number : 4 , Channel name : logbuffer
Dropped messages : 0
Overwritten messages : 0
Current messages : 127
%Jun 19 18:03:24:55 2006 Sysname IC/7/SYS_RESTART:
System restarted --
The rest is omitted here.
Table 1-5 display logbuffer
command output description
Field
Description
Logging buffer configuration and contents
Indicates the current state of the log buffer and its
contents, which could be enabled or disabled.