3Com S7902E Command Reference Manual - page 820
1-21
display isis route
Syntax
display isis route
[
ipv4
] [ [
level-1
|
level-2
] |
verbose
] * [
process-id
|
vpn-instance
vpn-instance-name
]
View
Any view
Default Level
1: Monitor level
Parameters
ipv4
: Displays IS-IS IPv4 routing information (the default).
verbose
: Displays detailed IS-IS IPv4 routing information.
process-id
: Displays the IS-IS IPv4 routing information of the IS-IS process. The ID is in the range of 1
to 65535.
vpn-instance-name
: Displays the IS-IS IPv4 routing information of the VPN instance. The
vpn-instance-name
is a string of 1 to 31 characters.
level-1
: Displays Level-1 IS-IS routes.
level-2
: Displays Level-2 IS-IS routes.
Description
Use the
display isis route
command to display IS-IS IPv4 routing information.
If no level is specified, both Level-1 and Level-2 routing information will be displayed.
Examples
# Display IS-IS IPv4 routing information.
Route information for ISIS(1)
-----------------------------
ISIS(1) IPv4 Level-1 Forwarding Table
-------------------------------------
IPV4 Destination IntCost ExtCost ExitInterface NextHop Flags
--------------------------------------------------------------------------
1.1.0.0/16 20 NULL Vlan1 1.2.1.1 R/L/-
1.2.0.0/16 10 NULL Vlan1 Direct D/L/-
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
ISIS(1) IPv4 Level-2 Forwarding Table