3Com S7902E Command Reference Manual - page 1398
1-27
By default, the join/prune timeout time is 210 seconds.
Related commands:
holdtime assert
,
pim ipv6 holdtime assert
,
pim ipv6 holdtime join-prune
.
Examples
# Set the global value of the join/prune timeout time to 280 seconds.
[Sysname] pim ipv6
[Sysname-pim6] holdtime join-prune 280
jp-pkt-size (IPv6 PIM view)
Syntax
jp-pkt-size
packet-size
undo jp-pkt-size
View
IPv6 PIM view
Default Level
2: System level
Parameters
packet-size
: Maximum size of join/prune messages in bytes, with an effective range of 100 to 64000.
Description
Use the
jp-pkt-size
command to configure the maximum size of join/prune messages.
Use the
undo jp-pkt-size
command to restore the system default.
By default, the maximum size of join/prune messages is 8,100 bytes.
Related commands:
jp-queue-size
.
Examples
# Set the maximum size of join/prune messages to 1,500 bytes.
[Sysname] pim ipv6
[Sysname-pim6] jp-pkt-size 1500
jp-queue-size (IPv6 PIM view)
Syntax
jp-queue-size
queue-size
undo jp-queue-size
View
IPv6 PIM view