3Com S7902E Command Reference Manual - page 749
1-17
View
Any view
Default Level
1: Monitor level
Parameters
process-id
: OSPF process ID, in the range 1 to 65535.
all
: Display the OSPF information of all interfaces.
interface-type interface-number
: Interface type and interface number.
Description
Use the
display ospf interface
command to display OSPF interface information.
If no OSPF process is specified, the OSPF interface information of all OSPF processes is displayed.
Examples
# Display OSPF interface information.
OSPF Process 1 with Router ID 192.168.1.1
Interfaces
Area: 0.0.0.0
IP Address Type State Cost Pri DR BDR
192.168.1.1 PTP P-2-P 1562 1 0.0.0.0 0.0.0.0
Area: 0.0.0.1
IP Address Type State Cost Pri DR BDR
172.16.0.1 Broadcast DR 1 1 172.16.0.1 0.0.0.0
Table 1-6 display ospf interface
command output description
Field
Description
Area
Area ID of the interface
IP address
Interface IP address (regardless of whether TE is enabled or not)
Type
Interface network type:
PTP, PTMP, Broadcast, or NBMA