3Com S7902E Command Reference Manual - page 1153
1-29
Examples
# Set the startup query count to 3 globally in the public instance.
[Sysname] igmp
[Sysname-igmp] startup-query-count 3
startup-query-interval (IGMP view)
Syntax
startup-query-interval
interval
undo startup-query-interval
View
Public instance IGMP view, VPN instance IGMP view
Default Level
2: System level
Parameters
interval
: Startup query interval in seconds, namely, the interval between general queries the IGMP
querier sends on startup, with an effective range of 1 to 18000.
Description
Use the
startup-query-interval
command to configure the startup query interval globally.
Use the
undo startup-query-interval
command to restore the system default.
By default, the startup query interval is 1/4 of the “IGMP query interval”.
By default, the IGMP query interval is 60 seconds, so the startup query interval = 60 / 4 = 15 (seconds).
Related commands:
igmp-startup-query-interval
,
timer query
.
Examples
# Set the startup query interval to 5 seconds globally in the public instance.
[Sysname] igmp
[Sysname-igmp] startup-query-interval 5
timer other-querier-present (IGMP view)
Syntax
timer other-querier-present
interval