3Com S7902E Command Reference Manual - page 763
1-31
Default Level
2: System level
Parameters
config
: Enables configuration logging.
error
: Enables error logging.
state
: Enables state logging.
Description
Use the
enable
command to enable specified OSPF logging.
Use the
undo enable
command to disable specified OSPF logging.
OSPF logging is disabled by default.
If no keyword is specified, all logging is enabled.
Examples
# Enable OSPF logging.
[Sysname] ospf 100
[Sysname-ospf-100] enable log
enable out-of-band-resynchronization
Syntax
enable
out-of-band-resynchronization
undo enable out-of-band-resynchronization
View
OSPF view
Default Level
2: System level
Parameters
None
Description
Use the
enable out-of-band-resynchronization
command to enable the OSPF out-of-band
resynchronization (OOB-Resynch) capability.
Use the
undo enable out-of-band-resynchronization
command to disable the OSPF out-of-band
resynchronization capability.
By default, the capability is disabled.
Examples
# Enable the out-of-band resynchronization capability for OSPF process 1.