3Com S7902E Command Reference Manual - page 2077
2-5
Examples
# Set the idle-timeout timer to 36 minutes.
[Sysname] ftp timeout 36
ftp update
Syntax
ftp update
{
fast | normal
}
undo ftp update
View
System view
Default Level
3: Manage level
Parameters
fast
: Fast update.
normal
: Normal update.
Description
Use the
ftp update
command to set the file update mode that the FTP server uses while receiving data.
Use the
undo ftp update
command to restore the default, namely, the normal mode.
Examples
# Set the FTP update mode to
normal
.
[Sysname] ftp update normal
FTP Client Configuration Commands
z
You must use the
ftp
command to enter FTP client view for configurations under this view. For
details, refer to
ftp
.
z
The prompt information in this section is that in the network where the 3Com S7900E series
Ethernet switches act as the FTP server. If you use other devices as the FTP server, PC for
example, the prompt information may be different.