3Com S7902E Command Reference Manual - page 1596
1-13
Field
Description
Remote Encap
Encapsulation type of the remote interface
C Bit
Control word, which can be 0 or 1
Remote MTU
MTU of the remote interface
display mpls l2vpn
Syntax
display mpls l2vpn
[
export-route-target-list
|
import-route-target-list
|
vpn-name
vpn-name
[
local-ce
|
remote-ce
] ]
View
Any view
Default Level
1: Monitor level
Parameters
export-route-target-list
: Displays the export route target list.
import-route-target-list
: Displays the import route target list.
vpn-name
: VPN name, a case insensitive string of 1 to 31 characters that cannot include the character
of “-“.
local-ce
: Displays the configurations and status of all local CEs of a specified VPN.
remote-ce
: Displays the configurations and status of remote CEs learned from other PEs.
Description
Use the
display mpls l2vpn
command to display information about L2VPNs configured on a PE.
If you do not specify a VPN, the command displays information about all L2VPNs.
Examples
# Display the L2VPN export route target list.
export vpn target list: 755:7 888:8
Table 1-11 display mpls l2vpn export-route-target-list
command output description
Field
Description
export vpn target list
BGP VPN export route target list
# Display information about all L2VPNs configured on the PE.
VPN Number: 1
vpn-name encap-type route-distinguisher mtu ce(L) ce(R)
vpn2 ethernet 500:1 888 0 0