3Com S7902E Command Reference Manual - page 1454
1-32
Description
Use the
peer as-path-acl
command to specify an AS path ACL to filter routes incoming from or
outgoing to an IPv6 MBGP peer/peer group.
Use the
undo peer as-path-acl
command to remove the configuration.
By default, no AS path ACL is specified for filtering the routes from/to an IPv6 MBGP peer/peer group.
Examples
# Specify AS path ACL 3 to filter routes outgoing to the IPv6 MBGP peer 1:2::3:4.
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 as-number 100
[Sysname-bgp-af-ipv6] quit
[Sysname-bgp] ipv6-family multicast
[Sysname-bgp-af-ipv6-mul] peer 1:2::3:4 enable
[Sysname-bgp-af-ipv6-mul] peer 1:2::3:4 as-path-acl 3 export
peer default-route-advertise (IPv6 MBGP address family view)
Syntax
peer
{
ipv6-group-name
|
ipv6-address
}
default-route-advertise
[
route-policy
route-policy-name
]
undo peer
{
ipv6-group-name
|
ipv6-address
}
default-route-advertise
View
IPv6 MBGP address family view
Default Level
2: System level
Parameters
ipv6-group-name
: Name of an IPv6 MBGP peer group, a string of 1 to 47 characters.
ipv6-address
: IPv6 address of an IPv6 MBGP peer.
route-policy-name
: Route policy name, a string of 1 to 19 characters.
Description
Use the
peer default-route-advertise
command to advertise a default route to an IPv6 MBGP
peer/peer group.
Use the
undo peer default-route-advertise
command to disable default route advertisement to an
IPv6 MBGP peer/peer group.
By default, no default route is advertised to any IPv6 MBGP peer/peer group.
With this command used, the router unconditionally sends a default route with the next hop being itself
to the IPv6 MBGP peer/peer group regardless of whether the default route is available in the routing
table.