3Com S7902E Command Reference Manual - page 703
1-3
Description
Use the
default-route originate cost
command to configure all the interfaces under the RIP process to
advertise a default route with the specified metric to RIP neighbors.
Use the
undo default-route originate
command to disable all the interfaces under the RIP process
from sending a default route.
By default, no default route is sent to RIP neighbors.
The RIP router with this feature configured will not receive any default routes from RIP neighbors.
Related commands:
rip default-route
.
Examples
# Configure all the interfaces under RIP process 1 to send only a default route with a metric of 2 to RIP
neighbors.
[Sysname] rip 100
[Sysname-rip-100] default-route only cost 2
display rip
Syntax
display rip
[
process-id
|
vpn-instance vpn-instance-name
]
View
Any view
Default Level
1: Monitor level
Parameters
process-id
: RIP process ID, in the range of 1 to 65535.
vpn-instance vpn-instance-name
: Specifies a VPN instance name, a string of 1 to 31 characters.
Description
Use the
display rip
command to display the current status and configuration information of the
specified RIP process.
z
If
process-id
is not specified, information about all configured RIP processes is displayed.
z
If
vpn-instance-name
is specified, the RIP configuration of the specified VPN instance is displayed.
Examples
# Display the current status and configuration information of all configured RIP processes.
Public VPN-instance name :
RIP process : 1
RIP version : 1
Preference : 100