3Com S7902E Command Reference Manual - page 1191
1-34
pim bsr-boundary
Syntax
pim bsr-boundary
undo pim bsr-boundary
View
Interface view
Default Level
2: System level
Parameters
None
Description
Use the
pim bsr-boundary
command to configure a PIM domain border, namely a bootstrap message
boundary.
Use the
undo pim bsr-boundary
command to remove the configured PIM domain border.
By default, no PIM domain border is configured.
Related commands:
c-bsr
;
multicast boundary
in
Multicast Routing and Forwarding Commands
in the
IP Multicast Volume
.
Examples
# Configure VLAN-interface 100 as a PIM domain border.
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim bsr-boundary
pim dm
Syntax
pim dm
undo pim dm
View
Interface view
Default Level
2: System level
Parameters
None
Description
Use the
pim dm
command to enable PIM-DM.