3Com S7902E Command Reference Manual - page 2197
1-24
Parameters
date
: Indicates the current system date and time, the format of which depends on the log host.
no-year-date
: Indicates the current system date and time (year exclusive).
none
: Indicates that no time stamp information is provided.
Description
Use the
info-center timestamp loghost
command to configure the time stamp format of the system
information sent to the log host.
Use the
undo
info-center timestamp loghost
command to restore the default.
By default, the time stamp format for system information sent to the log host is
date.
Examples
# Configure that the system information output to the log host does not include the year information.
[Sysname] info-center timestamp loghost no-year-date
info-center trapbuffer
Syntax
info-center trapbuffer
[
channel
{
channel
-
number | channel
-
name
}
|
size buffersize
] *
undo info-center trapbuffer
[
channel
|
size
]
View
System view
Default Level
2: System level
Parameters
size buffersize
: Specifies the maximum number of trap messages in a trap buffer, in the range 0 to
1,024 with 256 as the default value.
channel
-
number
: Specifies a channel number, in the range 0 to 9.
channel
-
name
: Specifies a channel name, which could be a default name or a self-defined name. The
user needs to specify a channel name first before using it as a self-defined channel name. For more
information, refer to the
info-center channel name
command.
Description
Use the
info-center trapbuffer
command to enable information output to the trap buffer and set the
corresponding parameters.
Use the
undo info-center trapbuffer
command to disable information output to the trap buffer.
By default, information output to the trap buffer is enabled with channel 3 (trapbuffer) as the default
channel and a maximum buffer size of 256.
Note that the
info
-
center trapbuffer
command takes effect only after the information center is enabled
with the
info-center enable
command.