3Com S7902E Command Reference Manual - page 2024
1-10
System temperature information (degree centigrade):
----------------------------------------------------
Board Temperature Lower limit Upper limit
1 43 20 70
2 50 0 80
3 56 0 80
display fan
Syntax
display fan
[
fan-id
]
View
Any view
Default Level
1: Monitor level
Parameters
fan-id
: Displays the operating state of the specified fan, where
fan-id
represents the built-in fan number.
The value varies with devices.
Description
Use the
display fan
command to display the operating state of built-in fans.
Examples
# Display the operating state of all fans in a device.
Fan 1 State: Normal
The above information displays all fans work normally.
display memory
Syntax
display memory
[
slot slot-number
] [
cpu
cpu-id
]
View
Any view
Default Level
1: Monitor level
Parameters
slot slot-number
: Specifies the slot number of a board. The value range varies with devices.
cpu
cpu-id:
Display the memory of a specified CPU, where
cpu-id
represents the ID of the CPU.
Support for the
cpu-id
argument depends on the device model.