3Com S7902E Command Reference Manual - page 1778
2-7
View
Any view
Default Level
2: System level
Parameters
radius-scheme
radius-scheme-name
: Specifies a RADIUS scheme by its name, which is a string of 1
to 32 characters.
session-id
session-id
: Specifies a session by its ID. The ID is a string of 1 to 50 characters.
time-range
start-time
stop-time
: Specifies a time range by its start time and end time in the format of
hh:mm:ss-mm/dd/yyyy or hh:mm:ss-yyyy/mm/dd.
user-name user-name
: Specifies a user by the user name, which is a case-sensitive string of 1 to 80
characters. The format of the
user-name
argument (for example, whether the domain name should be
included) must comply with that specified for usernames to be sent to the RADIUS server in the
RADIUS scheme.
slot slot-number
: Specifies the slot where the interface card is inserted.
Description
Use the
display stop-accounting-buffer
command to display information about the stop-accounting
requests buffered in the device by scheme, session ID, time range, user name, or slot.
Note that if receiving no response after sending a stop-accounting request to a RADIUS server, the
device buffers the request and retransmits it. You can use the
retry stop-accounting
command to set
the number of allowed transmission attempts.
Related commands:
reset stop-accounting-buffer
,
stop-accounting-buffer enable
,
user-name-format
,
retry stop-accounting
.
Examples
# Display information about the buffered stop-accounting requests on the interface board in slot 1 from
0:0:0 to 23:59:59 on August 31, 2006.
slot 1
Slot 1
Total 0 record(s) Matched
key (RADIUS scheme view)
Syntax
key
{
accounting
|
authentication
}
string
undo key
{
accounting
|
authentication
}
View
RADIUS scheme view