3Com S7902E Command Reference Manual - Pim Configuration Commands
of
2327
1-1
1
PIM Configuration Commands
The term “router” in this document refers to a router in a generic sense or a Layer 3 switch running the
PIM protocol.
PIM Configuration Commands
auto-rp enable
Syntax
auto-rp enable
undo auto-rp enable
View
Public instance PIM view, VPN instance PIM view
Default Level
2: System level
Parameters
None
Description
Use the
auto-rp enable
command to enable auto-RP.
Use the
undo auto-rp enable
command to disable auto-RP.
By default, auto-RP is disabled.
Related commands:
static-rp
.
Examples
# Enable auto-RP in the public instance.
[Sysname] pim
[Sysname-pim] auto-rp enable