3Com S7902E Command Reference Manual - page 1905
1-18
Related commands:
display
ssh
server
.
Examples
# Set the idle timeout period for SFTP user connections to 500 minutes.
[Sysname] sftp server idle-timeout 500
ssh client authentication server
Syntax
ssh client authentication server
server
assign
publickey
keyname
undo ssh client authentication server
server
assign publickey
View
System view
Default Level
2: System level
Parameters
server
: IP address or name of the server, a string of 1 to 80 characters.
keyname
: Name of the host public key of the server, a string of 1 to 64 characters.
Description
Use the
ssh client authentication server
command on a client to configure the host public key of the
server so that the client can determine whether the server is trustworthy.
Use the
undo ssh authentication server
command to remove the configuration.
By default, the host public key of the server is not configured, and when logging into the server, the
client uses the IP address or host name used for login as the public key name.
If the client does not support first authentication, it will reject unauthenticated servers. In this case, you
need to configure the public keys of the servers and specify the mappings between public keys and
servers on the client, so that the client uses the correct public key of a server to authenticate the server.
Note that the specified host public key of the server must already exist.
Related commands:
ssh client first-time enable
.
Examples
# Configure the public key of the server with the IP address of 192.168.0.1 to be key1.
[Sysname] ssh client authentication server 192.168.0.1 assign publickey key1
ssh client first-time enable
Syntax
ssh client first-time enable
undo ssh client first-time