3Com S7902E Command Reference Manual - page 127
1-7
G -- Defaulted, H -- Expired
Aggregation Interface: Bridge-Aggregation10
Aggregation Mode: Dynamic
Loadsharing Type: Shar
System ID: 0x8000, 000f-e267-6c6a
Local:
Port Status Priority Oper-Key Flag
-------------------------------------------------------------------------
Eth2/0/6 U 32768 1 {ACG}
Eth2/0/7 U 32768 1 {ACG}
Remote:
Actor Partner Priority Oper-Key SystemID Flag
-------------------------------------------------------------------------
Eth2/0/6 0 32768 0 0x8000, 0000-0000-0000 {EF}
Eth2/0/7 0 32768 0 0x8000, 0000-0000-0000 {EF}
Table 1-4
display link-aggregation verbose command output description
Field
Description
Loadsharing Type
Loadsharing type:
z
Shar for load sharing
z
NonS for non-load sharing
Port Status
Port state: Selected or unselected.
Flags
One-octet LACP state flags field. From the least
to the most significant bit, they are represented
by A through H as follows:
z
A indicates whether LACP is enabled. 1 for
enabled and 0 for disabled.
z
B indicates the timeout control value. 1 for
short timeout, and 0 for long timeout.
z
C indicates whether the link is considered as
aggregatable by the sending system. 1 for
true, and 0 for false.
z
D indicates whether the link is considered as
synchronized by the sending system. 1 for
true, and 0 for false.
z
E indicates whether the sending system
considers that collection of incoming frames
is enabled on the link. 1 for true and 0 for
false.
z
F indicates whether the sending system
considers that distribution of outgoing frames
is enabled on the link. 1 for true and 0 for
false.
z
G indicates whether the receive state
machine of the sending system is using
default operational partner information. 1 for
true and 0 for false.
z
H indicates whether the receive state
machine of the sending system is in the
expired state. 1 for true and 0 for false.
If a flag bit is set to 1, the corresponding English
letter that otherwise is not output is displayed.