3Com S7902E Command Reference Manual - McE Configuration Commands
1-1
1
MCE Configuration Commands
This chapter only describes the commands related to the multi-CE (MCE) feature. For information about
the routing protocol configuration commands in the configuration examples, refer to the
IP Routing
Volume
of this manual.
MCE Configuration Commands
description
Syntax
description text
undo
description
View
VPN instance view
Default Level
2: System level
Parameters
text
: Description for the VPN instance, a string of 1 to 80 characters.
Description
Use the
description
command to configure a description for the current VPN instance.
Use the
undo description
command to delete the description.
Examples
# Configure the description of VPN instance vpn1.
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1] description vpn1
display bgp vpnv4 vpn-instance group
Syntax
display bgp vpnv4
vpn-instance
vpn-instance-name
group
[
group-name
]