3Com S7902E Command Reference Manual - page 2184
1-11
info-center console channel
Syntax
info-center console channel
{
channel
-
number |
channel
-
name
}
undo info-center console channel
View
System view
Default Level
2: System level
Parameters
channel
-
number
: Specifies a channel number, in the range 0 to 9.
channel
-
name
: Specifies a channel name, which could be a default name or a self-defined name. The
user needs to specify a channel name first before using it as a self-defined channel name. For more
information, refer to the
info-center channel name
command.
Description
Use the
info-center console channel
command to specify the channel to output system information to
the console.
Use the
undo
info-center console channel
command to restore the default output channel to the
console.
By default, output of information to the console is enabled with channel 0 as the default channel (known
as console).
Note that the
info
-
center console channel
command takes effect only after the information center is
enabled first with the
info-center enable
command.
Examples
# Set channel 0 to output system information to the console.
[Sysname] info-center console channel 0
info-center enable
Syntax
info-center enable
undo info-center enable
View
System view
Default Level
2: System level