3Com S7902E Command Reference Manual - page 971
1-12
Field
Description
ASE AS-external-LSA
number
Total
Total LSA number
display ospfv3 next-hop
Syntax
display ospfv3
[
process-id
]
next-hop
View
Any view
Default Level
1: Monitor level
Parameters
process-id
: Specifies ID of an OSPFv3 process, ranging from 1 to 65535.
Description
Use the
display ospfv3 next-hop
command to display OSPFv3 next hop information.
If no process is specified, next hop information of all OSPFv3 processes is displayed.
Examples
# Display OSPFv3 next hop information.
OSPFv3 Router with ID (2.2.2.2) (Process 1)
Neighbor-Id Next-Hop Interface RefCount
1.1.1.1 FE80::20F:E2FF:FE00:1 Vlan100 1
Table 1-6
display ospfv3 next-hop
command output description
Field
Description
Neighbor-Id
Neighboring router ID
Next-hop Next-hop
address
Interface Outbound
interface
RefCount Reference
count
display ospfv3 peer
Syntax
display ospfv3
[
process-id
] [
area
area-id
]
peer
[ [
interface-type interface-number
] [
verbose
] |
peer-router-id
]