3Com S7902E Command Reference Manual - page 1546
1-14
display mpls lsp
Syntax
display mpls lsp
[
incoming-interface
interface-type interface-number
] [
outgoing-interface
interface-type interface-number
] [
in-label
in-label-value
] [
out-label
out-label-value
] [
asbr
|
[
vpn-instance
vpn-instance-name
] [
protocol
{
bgp
|
bgp-ipv6
|
ldp
|
static
} ] ] [
egress
|
ingress
|
transit
] [ {
exclude
|
include
}
dest-addr mask-length
] [
verbose
]
View
Any view
Default Level
1: Monitor level
Parameters
incoming-interface interface-type interface-number
: Specifies LSPs using the given interface as the
incoming interface. The
interface-type interface-number
combination specifies an interface by its type
and number.
outgoing-interface interface-type interface-number
: Specifies LSPs using the given interface as the
outgoing interface. The
interface-type interface-number
combination specifies an interface by its type
and number.
in-label
in-label-value
: Specifies LSPs using the given incoming label. The value of the label ranges 0
to 1048575.
out-label
out-label-value
: Specifies LSPs using the given outgoing label. The value of the label ranges
0 to 1048575.
asbr
: Specifies LSPs established by ASBRs.
vpn-instance
vpn-instance-name
: Specifies LSPs of a VPN instance. The VPN instance name is a
case-sensitive string of 1 to 31 characters.
protocol
: Specifies LSPs established by a given protocol.
bgp
: Specifies BGP LSPs.
bgp-ipv6
: Specifies IPv6 BGP LSPs, that is, BGP4+ LSPs.
ldp
: Specifies LDP LSPs.
static
: Specifies static LSPs.
egress
: Specifies LSPs taking the current LSR as the egress.
ingress
: Specifies LSPs taking the current LSR as the ingress.
transit
: Specifies LSPs taking the current LSR as a transit LSR.
exclude
: Specifies LSPs other than the one for the given FEC.
include
: Specifies the LSP for the given FEC.
dest-addr mask-length
: Specifies a FEC by its destination address and the length of the mask. The
mask length is in the range 0 to 32.
verbose
: Displays detailed information.