3Com S7902E Command Reference Manual - page 975
1-16
network
: Displays the Network-LSA information of the OSPFv3 link state request list.
router
: Displays the Router-LSA information of the OSPFv3 link state request list.
link-state-id
: Link state ID, in the format of an IPv4 address.
originate-router
ip-address
: Specifies the router ID of an advertising router.
statistics
: Displays the LSA statistics of the OSPFv3 link state request list.
Description
Use the
display ospfv3 request-list
command to display OSPFv3 link state request list information.
If no process is specified, the link state request list information of all OSPFv3 processes is displayed.
Examples
# Display the information of OSPFv3 link state request list.
OSPFv3 Router with ID (11.1.1.1) (Process 1)
Interface Vlan100 Area-ID 0.0.0.0
--------------------------------------------------------------------------
Nbr-ID 12.1.1.1
LS-Type LS-ID AdvRouter SeqNum Age CkSum
Router-LSA 0.0.0.0 12.1.1.1 0x80000014 774 0xe5b0
Table 1-10
display ospfv3 request-list
command output description
Field
Description
Interface Interface
name
Area-ID Area
ID
Nbr-ID
Neighbor router ID
LS-Type
Type of LSA
LS-ID Link
state
ID
AdvRouter Advertising
router
SeqNum
LSA sequence number
Age
Age of LSA
CkSum Checksum
# Display the statistics of OSPFv3 link state request list.
OSPFv3 Router with ID (11.1.1.1) (Process 1)
Interface Neighbor LSA-Count
Vlan100 10.1.1.1 0
Table 1-11
display ospfv3 request-list statistics command output description
Field
Description
Interface Interface
name
Neighbor
Neighbor router ID