3Com S7902E Command Reference Manual - page 653
1-4
View
Any view
Default Level
1: Monitor level
Parameters
number
: Tunnel interface number.
verbose
: Displays the detailed configuration and IPv6 packet statistics of the specified tunnel interface.
Description
Use the
display ipv6 interface tunnel
command to display the configuration and IPv6 packet statistics
of a tunnel interface or all tunnel interfaces.
Note that:
z
If no tunnel interface is specified, information about all tunnel interfaces is displayed.
z
If the
verbose
keyword is not specified, summary tunnel interface information is displayed.
Examples
# Display the detailed information of interface tunnel 2/0/0.
Tunnel2/0/0 current state :UP
Line protocol current state :UP
IPv6 is enabled, link-local address is FE80::202:201
Global unicast address(es):
3000::1, subnet is 3000::/64
Joined group address(es):
FF02::1:FF02:201
FF02::1:FF00:1
FF02::1:FF00:0
FF02::2
FF02::1
MTU is 1480 bytes
ND reachable time is 30000 milliseconds
ND retransmit interval is 1000 milliseconds
Hosts use stateless autoconfig for addresses
IPv6 Packet statistics:
InReceives: 45
InTooShorts: 0
InTruncatedPkts: 0
InHopLimitExceeds: 0
InBadHeaders: 0
InBadOptions: 0
ReasmReqds: 0
ReasmOKs: 0
InFragDrops: 0
InFragTimeouts: 0