3Com S7902E Command Reference Manual - page 2101
3-2
View
System view
Default Level
3: Manage level
Parameters
ipv6
: References an IPv6 ACL. If it is not specified, an IPv4 ACL is referenced.
acl-number
: Number of a basic ACL, in the range 2000 to 2999.
Description
Use the
tftp-server acl
command to use ACLs to restrict access to the TFTP server
Use the
undo tftp-server acl
command to restore the default.
By default, no restriction is configured.
You can reference an ACL control TFTP server access.
For more information about ACL, refer to
ACL Configuration
in the
Security Volume.
Examples
# Reference ACL 2000 to control IPv4 TFTP server access.
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 1.1.1.1 0
[Sysname-acl-basic-2000] quit
[Sysname] tftp-server acl 2000
# Reference IPv6 ACL 2001 to control Ipv6 TFTP server access.
[Sysname] acl ipv6 number 2001
[Sysname-acl6-basic-2001] rule permit source 2030:5060::9050/64
[Sysname-acl6-basic-2001] quit
[Sysname] tftp-server ipv6 acl 2001
tftp
Syntax
tftp server-address
{
get
|
put
|
sget
}
source-filename
[
destination-filename
]
[
source
{
interface
interface-type interface-number
|
ip
source-ip-address
} ]
View
User view
Default Level
3: Manage level
Parameters
server-address:
IP address or host name of a TFTP server.