3Com S7902E Command Reference Manual - page 1774
2-3
nas-ip address = 10.1.1.1
------------------------------------------------------------------
Total 1 RADIUS scheme(s)
Table 2-1 display radius scheme
command output description
Field
Description
SchemeName
Name of the RADIUS scheme
Index
Index number of the RADIUS scheme
Type
Type of the RADIUS server
Primary Auth IP/ Port/ State
IP address/access port number/current status of
the primary authentication server: (active or
block)
If there is no primary authentication server
specified, the IP address is 0.0.0.0 and the port
number is the default. This rule is also applicable
to the following three fields.
Primary Acct IP/ Port/ State
IP address/access port number/current status of
the primary accounting server: (active or block)
Second Auth IP/ Port/ State
IP address/access port number/current status of
the secondary authentication server: (active or
block)
Second Acct IP/ Port/ State
IP address/access port number/current status of
the secondary accounting server: (active or
block)
Auth Server Encryption Key
Shared key of the authentication server
Acct Server Encryption Key
Shared key of the accounting server
Interval for timeout(second)
Timeout time in seconds
Retransmission times for timeout
Times of retransmission in case of timeout
Interval for realtime accounting(minute)
Interval for realtime accounting in minutes
Retransmission times of realtime-accounting
packet
Retransmission times of realtime-accounting
packet
Retransmission times of stop-accounting packet
Retransmission times of stop-accounting packet
Quiet-interval(min) Quiet
interval for the primary server
Username format
Format of the username
Data flow unit
Unit of data flows
Packet unit
Unit of packets
nas-ip address
The IP address for the device to use as the
source address of the RADIUS packets to be
sent to the server
Total 1 RADIUS scheme(s)
1 RADIUS scheme in total