3Com S7902E Command Reference Manual - page 1540
1-8
display mpls ldp peer
Syntax
display mpls ldp peer
[
all
[
verbose
] | [
vpn-instance
vpn-instance-name
] [
peer-id
|
verbose
] ] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Default Level
1: Monitor level
Parameters
all
: Display information about all peers.
verbose
: Displays detailed information.
vpn-instance-name
: Name of the VPN instance, a case-sensitive string of 1 to 31 characters.
peer-id
: LSR ID of the peer.
|
: Uses a regular expression to filter the output information. For details about regular expression, refer to
Basic System Configuration
in the
System
Volume
.
begin
: Displays all lines starting with the line that matches the regular expression.
exclude
: Displays all lines other than those matching the regular expression..
include
: Displays all lines matching the regular expression.
regular-expression
: Regular expression, a case-sensitive string of 1 to 80 characters.
Description
Use the
display mpls ldp peer
command to display information about specified peers or all peers.
Related commands:
mpls ldp
(system view),
mpls ldp
(interface view).
Examples
# Display information about all peers.
LDP Peer Information in Public network
Total number of peers: 3
--------------------------------------------------------------
Peer-ID Transport-Address Discovery-Source
--------------------------------------------------------------
172.17.1.2:0 172.17.1.2 Vlan-interface1
168.1.1.1:0 168.1.1.1 Vlan-interface2
100.10.1.1:0 100.10.1.1 Vlan-interface3
--------------------------------------------------------------
# Display detailed information about all peers.
LDP Peer Information in Public network
---------------------------------------------------------------