3Com S7902E Command Reference Manual - page 2076
2-4
undo ftp server
View
System view
Default Level
3: Manage level
Parameters
None
Description
Use the
ftp server enable
command to enable the FTP server.
Use the
undo ftp server
command to disable the FTP server.
By default, the FTP server is disabled to prevent attacks.
Examples
# Disable the FTP server.
[Sysname] undo ftp server
% Close FTP server
ftp timeout
Syntax
ftp timeout minute
undo ftp timeout
View
System view
Default Level
3: Manage level
Parameters
minute
: Idle-timeout timer in minutes, in the range 1 to 35791. The default is 30 minutes.
Description
Use the
ftp timeout
command to set the idle-timeout timer.
Use the
undo ftp timeout
command to restore the default.
After you log in to an FTP server, an FTP connection is established. When the connection is disrupted,
the FTP server, if not notified, cannot realize that and thus maintains the connection. To address this
problem, you can set an idle-timeout timer so that the FTP server can disconnect from the user if no
information is received or/and transmitted before the timer expires.