3Com S7902E Command Reference Manual - page 1798
3-1
3
HWTACACS Configuration Commands
HWTACACS Configuration Commands
data-flow-format (HWTACACS scheme view)
Syntax
data-flow-format
{
data
{
byte
|
giga-byte
|
kilo-byte
|
mega-byte
}
|
packet
{
giga-packet
|
kilo-packet
|
mega-packet
|
one-packet
} } *
undo data-flow-format
{
data
|
packet
}
View
HWTACACS scheme view
Default Level
2: System level
Parameters
data
: Specifies the unit for data flows, which can be byte, kilobyte, megabyte, or gigabyte.
packet
: Specifies the unit for data packets, which can be one-packet, kilo-packet, mega-packet, or
giga-packet.
Description
Use the
data-flow-format
command to specify the unit for data flows or packets to be sent to a
HWTACACS server.
Use the
undo data-flow-format
command to restore the default.
By default, the unit for data flows is
byte
and that for data packets is
one-packet
.
Related commands:
display hwtacacs
.
Examples
# Define HWTACACS scheme
hwt1
to send data flows and packets destined for the TACACS server in
kilobytes and kilo-packets.
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] data-flow-format data kilo-byte packet kilo-packet
display hwtacacs
Syntax
display hwtacacs
[
hwtacacs-scheme-name
[
statistics
] ]
[
slot slot-number
]