3Com S7902E Command Reference Manual - page 2127
1-22
a target host, enabling the device to send trap messages to different NMSs. The number of target hosts
that can be configured varies with the device model.
z
If udp-port port-number is not specified, port number 162 is used.
z
If the key words v1, v2 and v3 are not specified, v1 is used.
z
If the key words authentication and privacy are not specified, the authentication mode is no
authentication, no privacy.
Related commands:
enable snmp trap updown
,
snmp-agent trap enable
,
snmp-agent trap source
,
snmp-agent trap life
.
Examples
# Enable the device to send SNMP traps to 10.1.1.1, using the community name of
public
.
[Sysname] snmp-agent trap enable standard
[Sysname] snmp-agent target-host trap address udp-domain 10.1.1.1 params securityname public
# Enable the device to send SNMP traps to the device which is in VPN 1 and has an IP address of
10.1.1.1, using the community name of
public
.
[Sysname] snmp-agent trap enable standard
[Sysname] snmp-agent target-host trap address udp-domain 10.1.1.1 vpn-instance vpn1 params
securityname public
snmp-agent trap enable
Syntax
snmp-agent trap enable
[
bgp
|
configuration
|
flash
|
mpls
|
ospf
[
process-id
] [
ifauthfail
|
ifcfgerror
|
ifrxbadpkt
|
ifstatechange
|
iftxretransmit
|
lsdbapproachoverflow
|
lsdboverflow
|
maxagelsa
|
nbrstatechange
|
originatelsa
|
vifcfgerror
|
virifauthfail
|
virifrxbadpkt
|
virifstatechange
|
viriftxretransmit
|
virnbrstatechange
] * |
standard
[
authentication
|
coldstart
|
linkdown
|
linkup
|
warmstart
]* |
system
|
vrrp
[
authfailure
|
newmaster
] ]
undo snmp-agent trap enable
[
bgp
|
configuration
|
flash
|
mpls
|
ospf
[
process-id
] [
ifauthfail
|
ifcfgerror
|
ifrxbadpkt
|
ifstatechange
|
iftxretransmit
|
lsdbapproachoverflow
|
lsdboverflow
|
maxagelsa
|
nbrstatechange
|
originatelsa
|
vifcfgerror
|
virifauthfail
|
virifrxbadpkt
|
virifstatechange
|
viriftxretransmit
|
virnbrstatechange
] * |
standard
[
authentication
|
coldstart
|
linkdown
|
linkup
|
warmstart
]* |
system
|
vrrp
[
authfailure
|
newmaster
]
]
View
System view
Default Level
3: Manage level
Parameters
bgp
: Enables the sending of traps of the BGP module.
configuration
: Enables the sending of configuration traps.
flash
: Enables the sending of FLASH-related traps.