3Com S7902E Command Reference Manual - page 1175
1-18
Parameters
all-instance
: Specifies all instances.
vpn-instance vpn-instance-name
: Specifies a VPN instance. A VPN instance name is a case sensitive
string of up to 31 characters and must not contain any space.
interface-type
interface-number
: Displays the PIM information on a particular interface.
verbose
: Displays the detailed PIM information.
Description
Use the
display pim interface
command to view the PIM information on the specified interface or all
interfaces.
Note that if neither
all-instance
nor
vpn-instance
is specified, this command will display the
information on the public instance.
Examples
# View the PIM information on all interfaces in the public instance.
VPN-Instance: public net
Interface NbrCnt HelloInt DR-Pri DR-Address
Vlan1 1 30 1 10.1.1.2
Vlan2 0 30 1 172.168.0.2 (local)
Vlan3 1 30 1 20.1.1.2
Table 1-5 display pim interface
command output description
Field
Description
VPN-Instance: public net
Public instance
Interface Interface
name
NbrCnt
Number of PIM neighbors
HelloInt
Hello interval
DR-Pri
Priority for DR election
DR-Address
DR IP address
# View the detailed PIM information on Vlan-interface 1 in the public instance.
VPN-Instance: public net
Interface: Vlan-interface1, 10.1.1.1
PIM version: 2
PIM mode: Sparse
PIM DR: 10.1.1.2
PIM DR Priority (configured): 1
PIM neighbor count: 1
PIM hello interval: 30 s
PIM LAN delay (negotiated): 500 ms
PIM LAN delay (configured): 500 ms
PIM override interval (negotiated): 2500 ms