3Com S7902E Command Reference Manual - page 1193
1-36
pim hello-option holdtime
Syntax
pim hello-option holdtime
interval
undo pim hello-option holdtime
View
Interface view
Default Level
2: System level
Parameters
interval
: PIM neighbor timeout time in seconds, with an effective range of 1 to 65,535. 65,535 means
that the PIM neighbor is always reachable.
Description
Use the
pim hello-option holdtime
command to configure the PIM neighbor timeout time on the
current interface.
Use the
undo pim hello-option holdtime
command to restore the system default.
By default, the PIM neighbor timeout time is 105 seconds.
Related commands:
hello-option holdtime
.
Examples
# Set the PIM neighbor timeout time to 120 seconds on VLAN-interface 100.
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim hello-option holdtime 120
pim hello-option lan-delay
Syntax
pim hello-option lan-delay
interval
undo pim hello-option lan-delay
View
Interface view
Default Level
2: System level
Parameters
interval
: LAN-delay time in milliseconds, with an effective range of 1 to 32,767.