3Com S7902E Command Reference Manual - page 1598
1-15
Field
Description
LB Label
block
# Display information about remote CEs of L2VPN vpn1.
no. ce-id peer-id route-distinguisher LB
1 4 3.3.3.9 100:1 132096/0/10
Table 1-15 display mpls l2vpn vpn-name remote-ce
command output description
Field
Description
no Sequence
number
ce-id CE
ID
peer-id
IP address of the peer
LB Label
block
display mpls l2vpn connection
Syntax
display mpls l2vpn connection
[
vpn-name
vpn-name
[
remote-ce
ce-id
|
down
|
up
|
verbose
] ]
display mpls l2vpn connection
[
interface
interface-type interface-number
|
summary
]
View
Any view
Default Level
1: Monitor level
Parameters
vpn-name
: VPN name, a case insensitive string of 1 to 31 characters that cannot include the character
of “-“.
ce-id
: ID of the remote CE for the L2VPN connection, in the range 0 to 249.
down
: Displays detailed information about the connections that are down.
up
: Displays detailed information about the connections that are up. If you specify neither the
down
nor
the
up
keyword, the command displays detailed information about connections that are either up or
down.
verbose
: Displays detailed information. This keyword is valid only when displaying information about all
connections in a VPN.
interface interface-type interface-number
: Specifies an interface by its type and number.
summary
: Displays summary information about connections.