3Com S7902E Command Reference Manual - page 169
1-6
Parameters
interface interface-type interface-number
: Specifies a port by its type and number.
brief
: Displays the LLDP information in brief.
Description
Use the
display lldp neighbor-information
command to display the LLDP information about the
neighboring devices received through a port.
With no keyword/argument specified, this command displays the LLDP information received through all
the ports.
Examples
# Display the LLDP information received through all the ports.
LLDP neighbor-information of port 144[GigabitEthernet2/0/48]:
Neighbor index : 1
Update time : 0 days,1 hours,45 minutes,4 seconds
Chassis type : MAC address
Chassis ID : 000f-e22e-972b
Port ID type : Interface name
Port ID : GigabitEthernet3/0/48
Port description : GigabitEthernet3/0/48 Interface
System name : System
System description : System
System capabilities supported : Bridge,Router
System capabilities enabled : Bridge,Router
Management address type : ipV4
Management address : 192.168.0.74
Management address interface type : IfIndex
Management address interface ID : 347
Management address OID : 0
Port VLAN ID(PVID): 1
Port and protocol VLAN ID(PPVID) : 1
Port and protocol VLAN supported : Yes
Port and protocol VLAN enabled : No
VLAN name of VLAN 1: VLAN 0001
Auto-negotiation supported : Yes
Auto-negotiation enabled : Yes
OperMau : speed(1000)/duplex(Full)
Power port class : PSE
PSE power supported : Yes
PSE power enabled : No