3Com S7902E Command Reference Manual - page 662
1-2
Field
Description
Interval(s) Counter
sampling
interval
sFlow Port Information
Information of the ports enabled with sFlow
Interface
sFlow enabled interface
Direction
Packet sampling direction:
z
In/Out: Samples both inbound and outbound packets.
z
In: Samples inbound packets.
z
Out: Samples outbound packets.
Rate
Packet sampling rate
Mode
Packet sampling mode. Random indicates sampling a random
number of packets.
Status
Status of the sFlow enabled port:
z
Suspend: Indicates the port is suspended, and it stops
sampling.
z
Active: Indicates the port is active and performs sampling.
sflow agent ip
Syntax
sflow agent ip
ip-address
undo sflow agent ip
View
System view
Default Level
2: System level
Parameters
ip-address
: IP address of the sFlow agent.
Description
Use the
sflow agent ip
command to configure the IP address of the sFlow agent.
Use the
undo sflow agent ip
command to remove the configured IP address.
By default, no IP address is configured for the sFlow agent.
Note that:
z
The sFlow agent and sFlow collector must not have the same IP address.
z
Currently, a device supports only one sFlow agent.
z
sFlow does not work if the sFlow agent has no IP address configured, or when you execute the
undo sflow agent ip
command.
Examples
# Configure the IP address of the sFlow agent.