3Com S7902E Command Reference Manual - page 171
1-8
Field
Description
System capabilities enabled
Capabilities currently enabled on the neighboring
device, which can be:
z
Bridge, indicating switching is currently enabled.
z
Router, indicating routing is currently enabled.
Management address type
Management address type
Management address
Management address
Management address interface type
Type of the interface identified by the management
address
Management address interface ID
Management address interface ID
Management address OID
Management address object ID
Port VLAN ID
Port VLAN ID
Port and protocol VLAN ID(PPVID)
Port protocol VLAN ID
Port and protocol VLAN supported
Indicates whether protocol VLAN is supported.
Port and protocol VLAN enabled
Indicates whether protocol VLAN is enabled.
VLAN name of VLAN 1
Name of he port VLAN
Auto-negotiation supported
Indicates whether auto-negotiation is supported.
Auto-negotiation enabled
State of auto-negotiation
OperMau
Current speed and duplex state
Power port class
PoE device type, which can be:
z
PSE, indicating a power supply device.
z
PD, indicating a powered device.
PSE power supported
Indicates whether or not the device can operate as a
PSE.
PSE power enabled
Indicates whether or not the device is operating as a
PSE.
PSE pairs control ability
Indicates whether or not the PSE-PD pair control is
available.
Power pairs
PoE mode, which can be
Signal
or
Spare
.
Port power classification
Port power classification of the PD, which can be the
following:
z
Class0
z
Class1
z
Class2
z
Class3
z
Class4
Link aggregation supported
Indicates whether or not link aggregation is supported.
Link aggregation enabled
Indicates whether or not link aggregation is enabled.
Aggregation port ID
Aggregation group ID, which is 0 if link aggregation is
not enabled.
Maximum frame Size
Maximum frame size supported