3Com S7902E Command Reference Manual - page 1132
1-8
Default Level
1: Monitor level
Parameters
all-instance
: Specifies all instances.
vpn-instance vpn-instance-name
: Specifies a VPN instance. A VPN instance name is a case sensitive
string of up to 31 characters and must not contain any space.
group-address
: Specifies a multicast group by its IP address, in the range of 224.0.1.0 to
239.255.255.255.
Description
Use the
display igmp ssm-mapping
command to view the configured IGMP SSM mappings for the
specified multicast group.
Note that if neither
all-instance
nor
vpn-instance
is specified, this command will display the
information on the public instance.
Related commands:
ssm-mapping
.
Examples
# View the IGMP SSM mappings for multicast group 232.1.1.1 in the public instance.
VPN-Instance: public net
Group: 232.1.1.1
Source list:
1.2.3.4
5.5.5.5
10.1.1.1
100.1.1.10
Table 1-5 display igmp ssm-mapping
command output description
Field
Description
VPN-Instance: public net
Public instance
Group
Multicast group address
Source list
List of multicast source addresses
display igmp ssm-mapping group
Syntax
display igmp
[
all-instance
|
vpn-instance vpn-instance-name
]
ssm-mapping
group
[
group-address
|
interface
interface-type
interface-number
] [
verbose
]
View
Any view