3Com S7902E Command Reference Manual - page 781
1-49
ospf mib-binding
Syntax
ospf mib-binding
process-id
undo ospf mib-binding
View
System view
Default Level
2: System level
Parameters
process-id
: OSPF process ID, in the range 1 to 65535.
Description
Use the
ospf mib-binding
command to bind an OSPF process to MIB operation.
Use the
undo ospf mib-binding
command to restore the default.
By default, MIB operation is bound to the first enabled OSPF process.
Examples
# Bind OSPF process 100 to MIB operation.
[Sysname] ospf mib-binding 100
# Restore the default, that is, bind the first enabled OSPF process to MIB operation.
[Sysname] undo ospf mib-binding
ospf mtu-enable
Syntax
ospf mtu-enable
undo ospf mtu-enable
View
Interface view
Default Level
2: System level
Parameters
None
Description
Use the
ospf mtu-enable
command to enable an interface to add the real MTU into DD packets.