3Com S7902E Command Reference Manual - page 1467
1-45
Parameters
ipv6-address
: Soft-resets the connection to the specified IPv6 MBGP peer.
all
: Soft-resets all IPv6 MBGP connections.
external
: Soft-resets IPv6 multicast eBGP connections.
group ipv6-group-name
: Soft-resets connections to an IPv6 multicast peer group. The name of the
peer group is a string of 1 to 47 characters.
internal
: Soft-resets IPv6 multicast iBGP connections.
export
: Performs soft-reset in outbound direction.
import
: Performs soft-reset in inbound direction.
Description
Use the
refresh bgp ipv6 multicast
command to soft-reset specified IPv6 MBGP connections. With
this feature, you can refresh the IPv6 MBGP routing table and apply a new policy without tearing down
IPv6 MBGP connections.
To perform IPv6 MBGP soft-reset, all routers in the network should support route-refresh. If a peer not
supporting route refresh exists in the network, you need to use the
peer keep-all-routes
command on
the local router to save all route updates from the peer before performing soft reset.
Examples
# Soft-reset inbound IPv6 MBGP connections.
reset bgp ipv6 multicast
Syntax
reset bgp ipv6 multicast
{
as-number
|
ipv6-address
|
all
|
group ipv6-group-name
|
external
|
internal
}
View
User view
Default Level
2: System level
Parameters
as-number
: Resets the connections to IPv6 MBGP peers in the specified AS.
ipv6-address
: Resets the connection to the specified peer.
flap-info
: Clears routing flap information.
all
: Resets all IPv6 MBGP connections.
group ipv6-group-name
: Resets the connections to the specified IPv6 MBGP peer group.
external
: Resets all the IPv6 multicast eBGP connections.
internal
: Resets all the IPv6 multicast iBGP connections.